That's the original 45 year old door.
Here we go- first I tear the stucco off because I'm replacing the entire thing - the door AND the side-light.
The side-light window is out, and I'm ripping out the frame.
Now I'm ripping off the drywall on the inside.
Just one 2x4 left!
8:48 AM - Ouchy! I got a splinter! I hate it when that happens. So I put my 'scientist' goggles on and performed surgery. No cause for alarm - I got it! Back to work.
Demolition done! Time to prepare the 'rough' opening for the new door. But first...
9:45 AM - It's going to be a long day, so coffee and donuts are a well deserved mid-morning snack! Nick liked that part too!
Here's an important part - the 'sill'. That's right, a door has a 'sill' too (just like a window). I learned that from the guy at Home Depot. I got this one weather-proofed, perfectly sized and ready to go, then... the first set-back. I discovered that this 2x6 sill would be too tall - Argh!
OK, no use crying about it. I just need to find a hunk of wood that wasn't quite so thick and move along. Fortunately I had just such a piece of wood in my 'spare wood' supply.
All I had to do was rip the board to the right width, give it a couple of coats of weather-proofing stain, and I'd be ready for action!
Oh - look at the pretty flowers! Hey - there's a job to do! Quit messin' around with the camera and get back to work!
3:40 PM - The rough opening is finally ready! I had to add a 2x4 on one side and a 1x4 on the other, and of course the set-back on the door-sill cost me a lot of time. But finally, I'm putting the new door in place! That's Nick's arm sticking out from behind the door. He was too shy to actually show his face.
Time for shims! This is actually the trickiest part - getting the door straight, level, and not tweaked. I learned a lot about all of that on the side door a couple of months ago. That helped a lot, this part didn't take too long!
I was a little worried about the heat, since I was going to have a large gaping hole in the front of the house all day. Fortunately it didn't get that hot! And the house only got up to 80 inside.
5:00 PM - The first screw! Yeah - I'm starting to put screws in - that's a major milestone in my book!
6:12 PM - Been at it for almost 12 hours now. All the screws are in and the shims are cut off! It seems like I should be done by now, but wait... do I want to be able to lock the front door before I go to bed tonight? If so, I'd better put a door knob and deadbolt on. Next task...
I thought the door sill height was a set-back!? It turned out, the door hardware was fraught with issues. The door manufacturer did a poor job cutting the holes. The holes in the door didn't line up with the holes in the door jamb, and there were other problems. I had to do a lot of chiseling, dremeling and adjusting to get all the hardware to fit correctly.
8:40 PM - YEAH! I'm snapping on the final piece to the doorknob hardware! I'm done! It's finished! I can't stand this door any more! I've been working on this thing for 14 hours now! Can't I go watch TV? No, I have to clean up - nuts!
Did you ever try Corona mixed with Limeade? I can attest - it's pretty good, especially after you've been working on your front door ALL DAY LONG!That's the story. The major work is finished. Next I have to insulate and figure out just how to do the trim on the inside and the outside - another tricky part. But the door is finally in, and I've reclaimed that space in the garage! Counselor, Construction and bathroom Concierge, it was definitely a full day.






